SVC GROUP ASM1024-600, Руководство пользователя

Страница: 19 / 25

1 5 1 5 1 5 1 5
SVC WIRELESS EXTERNAL DATA INTERFACE 4 CHANNEL USER MANUAL REVISION 1.0
Replacing the Battery
The rechargeable NiMH battery is considered a consumable item, which will need to be replaced over
time, with usage. Replacement batteries may be ordered from Spectra Vista using part number
CAB1024-504.
To replace the battery:
•
Turn OFF the unit.
•
Remove any external sensors that are attached to the unit.
•
Loosen the 4 captured screws from the top of the unit and carefully remove the top cover.
Note that there are wiring harnesses that will still attach the top cover to the lower chassis. It
is NOT necessary to remove all of the wiring harnesses in order to replace the battery, just
carefully set the top cover to the side of the lower chassis, as shown below:
Figure 23 Battery Replacement – Opening The Unit
•
Remove the two-conductor RED/BLACK battery connector from the small PCB that is
attached to the lid of the enclosure. The correct battery connector on the small PCB is
marked “J2” and “BATT”. See the close up photo of the bottom side of the unit lid.