SVBONY SV405CC, Руководство пользователя

Страница: 12 / 99

9. Other Special Functions
9.1 DDR High-speed Memory
The SV405CC camera has a built-in 256MB (2Gb) DDR3 high-speed memory to
buffer image data to ensure stable data transmission. And it can effectively
reduce the glow effect caused by slow readout speed.
9.2 Ultra-short Back Intercept
The back intercept of the SV405CC can be shortened to 6.5mm, allowing
compatibility with more devices and lenses.
9.3 Pixel Binning
The SV405CC camera supports Bin1, Bin2, Bin3, Bin4 software pixel binning
modes.
10. Equipment Care and Maintenance
Protect the Refrigerator
Thermal shock should be avoided when using the camera. The so-called thermal
shock refers to the internal strong stress that the refrigerator has to bear due to
the principle of thermal expansion and contraction when the temperature of the
refrigerator suddenly rises or falls. Severe thermal shock can shorten the life of
the cooler or even damage it completely. Therefore, when you start using the
cooler to adjust the temperature of the CMOS, you should avoid turning on the
cooler to maximum power at once. Instead, the power of the cooler should be
gradually increased. Before disconnecting the power supply, if the power of the
cooler is relatively high, the power of the cooler should be gradually reduced,
and then disconnect the power supply.
CMOS Care and Maintenance
Cleaning of CMOS Sensors and Optical Window
If you find dust on the CMOS sensor, you can remove the front half of the
camera. Then use the cleaning kit for DSLR camera sensors to clean the CMOS
sensor. You must be careful when cleaning it. You can also use a DSLR cleaning
tool or lens tissue to clean it. Be careful not to use too much force, because the
coating of the CMOS sensor is very fragile and can be scratched easily. The
general identification of whether the dust is on the sensor or on the window glass
is as follows.
10