WSE103
6
SVAT ELECTRONICS
Now You Can See
TROUBLESHOOTING
TROUBLESHOOTING
If you are having trouble operating this product, please consult the guide below
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Problem
Solution
No camera picture
1.
Check all connections and AC adapters.
2. Ensure camera(s) and receiver are set to
correct channels.
2. Make sure camera is within range of
the receiver.
Blank TV screen
1.
Make sure the receiver is switched ON.
2.
Make sure the AC adapter is plugged in
3.
If using batteries for the camera, make sure
they are charged.
4.
Make sure your TV is set to the Video
Input channel.
5.
Ensure the RCA plugs are connected to both
the receiver and the back of your TV/VCR.
Interferance on camera
picture
1.
Make sure each camera is within range, and
that no obstructions are blocking the signal.
2.
Try repositioning the camera, receiver, or both
to improve the reception quality.
3.
Reposition other nearby equipment
transmitting on the 2.4 GHz frequency.
