ISC301
10
NOTE:
Imitation cameras are commonly used in noticeable areas to deter thieves and
vandals away from a person’s property. The presence of a camera (functioning
or not) may cause the intruders to abandon their plans and move on to another
location. We always recommend using imitation cameras in conjunction with a
functioning surveillance system for increased security.
INSTALLATION
MOUNTING THE IMITATION CAMERA
1. Using the Drilling Template Card provided in the box, mark the location where you want to
mount the imitation camera.
2. Drill the necessary holes in the marked spots and insert the provided wall anchors into the
holes. Tap the anchors gently with a hammer until the anchor is flush with the wall.
3. Insert a screw into the wall anchor and tighten until the screw sticks out only about ½ inch.
4. Locate the wall mounting holes on the bottom of the camera and slide the holes over the
screws on the wall. Twist the imitation camera counterclockwise to secure it into place.
