SVAT ISC300, Инструкция по эксплуатации

Страница: 13 / 36

ISC300
12
MOUNTING THE IMITATION CAMERA
1. Using the drilling templates provided on
page 15, mark the location where you have
chosen to mount the imitation camera.
2. Drill the necessary holes in the marked spots and
insert the provided wall anchors into the holes.
Tap the anchors gently with a hammer until the
anchor is flush with the wall.
3. Place the camera base over the marked location.
Align the holes with the wall anchors and drill the
camera into place.
4. Make any final adjustments and pull the “wire”
(black tubing) into the hole on the top of the
mounting bracket.
INSTALLATION