SVAT ISC300, Инструкция по эксплуатации

Страница: 12 / 36

ISC300
11
TURNING THE FLASHING LED ON
Once the batteries have been installed, following the instructions above, the red LED will begin
to flash (2 second intervals). Removing the batteries turns off the LED.
ADjUSTING THE CAMERA ANGLE
1. Holding the camera housing firmly, turn
the camera base counterclockwise to loosen
the base.
2. Tilt the camera up and down, side to side
until you have the desired angle.
3. Once the camera base is in the desired
angle, turn the camera base clockwise to
tighten it into position.
1
2
NOTE: Imitation cameras are commonly used in noticeable areas to deter thieves and
vandals away from a person’s property. The presence of a camera (functioning
or not) may cause the intruders to abandon their plans and move on to another
location. We always recommend using imitation cameras in conjunction with a
functioning surveillance system for increased security.
INSTALLATION