CV0204DVR
50
SVAT ELECTRONICS
Now You Can See
Step 6:
In the Port Range screen, proceed as follows:
In the
Service Name
field, type
DVR
In the
Global Port Range
field, enter in the first box, the first number of the port you
need to port forward (e.g. 80) and in the second box the ending port number (e.g. 80)
In the
Base Host
Port enter the first port to be forwarded (80)
In
Protocol
, select
TCP
Select the
Next
button when complete
Step 7:
In the
Nat Configuration
Menu, use the
Service Name down
box and select the
configuration just created. Select the
Enable
button.
Port forwarding is now complete!
8. MOT
8. MOT
OROLA
OROLA
ROUTER
ROUTER
The port forwarding process may vary depending on the brand and model number of the
router being used. Port forwarding of a router is required to allow user access to your
network device. Regardless of the Motorola router being used, the process of port
forwarding is similar. You will need to enable the ports by locating the port range
forwarding screen. The set up instruction outlined below is an example of port forwarding
a Motorola Router using
Motorola Model SBG 1000
.
Step 1:
Open your web browser.
Enter the router IP address (
192.168.0.1
) in the address bar as shown below, followed
by pressing Enter.
Step 2:
Enter
‘admin’
in the User ID and
‘motorola’
in the Password dialog box followed by
clicking
‘Log In’
to enter the Motorola configuration page.
Step 3:
Select the
Gateway
button
Step 4:
Select the
Port Forwarding
button
Step 5:
Select In the Add New Port Forward Entry screen, proceed as follows:
In the
Template
field, select
Custom
In the
Name
field, select
DVR
In the
Port Start
field, enter the first number of the port you need to port forward (e.g. 80)
In the
Port End
field, enter the ending port number (e.g. 80)
In the
LAN IP
Address field enter the IP address (192.168.0.1)
Check the
Enable
button
Finally click the
Add
button, followed by selecting the
Apply
button.
Port forwarding is now complete!
