Svarog PROTIG -PIII Series, Руководство пользователя

Страница: 7 / 24

5
WELDING MACHINE INTRODUCTION
PROTIG-PIII SERIES Digital Inverter DC welding machine is the use of an inert gas (argon) as
a protective medium arc, the use of a high melting point of the metal tungsten or tungsten oxide as an
electrode, the workpiece as the other electrode, using high pressure high frequency or high-voltage
pulse to advance into the inert gas ionization weld region, and between the tungsten electrode and the
workpiece to ignite arc welding molten metal so as to achieve an effect of welding equipment. Its rapid
power fluctuations can give good compensation, for a variety of welding processes can quickly and
accurately control, so smooth and soft welding, small splash, weld easily controlled. In welding low
carbon steel, stainless steel, high-strength steel and alloy steel and other materials can obtain
high-quality welds.
Characteristics of welding machines are:

TIG welding process does not melt, the arc is relatively stable, easy to control weld quality.

can be filled wire, the wire can not fill, both suitable for welding sheet metal, also suitable for welding
thicker plate.

concentrated heat from the arc when welding sheet metal deformation of the workpiece is
significantly less than arc welding and hand.

suitable for all position welding.

particularly suitable for welding thin 3mm or less, less than 1mm thick sheet can also be satisfied with
the quality of welding.

gentle arc, arc focus on good, fillet welds easily, but also for reliable positioning welding.

EMC Category: A category;
PROTIG-PIII SERIES Digital Inverter DC welding machine uses advanced digital control technology,
the use of international advanced IGBT (insulated gate bipolar transistor) power module as a converter
device, combined with specially developed digital control circuit high so that the whole of consistency
and reliability, fast dynamic response, stable arc characteristics. This series welding machine has: DC
welding, DC MMA, and many other functions, it can basically meet the requirements of various welding
processes. It is widely used in pressure vessels, construction, shipbuilding, petrochemical and other
sectors of production and maintenance.
PROTIG PIII Series Digital Inverter DC welding machine has the following characteristics:

fully retained ZX7 welder function, to buy a welder equal PROTIG PIII series has two different
products.

All welding parameters can be accurately preset users to quickly set up to facilitate the welding
parameters needed.
 functional, TIG has a 2-step, 4-step, spot and intermittent welding functions; remote control function
is automatically identified.
PROTIG PIII Series welding specifications: PROTIG 315PIII
，
PROTIG 400III, PROTIG 500PIII.
The content of this specification has corrupted, or welding feature
changes, this specification is subject to change without notice.