Svarog PROTIG -PIII Series, Руководство пользователя

Страница: 17 / 24

15
time.Generally in dust without serious dust once a year, in the case of dust serious, once or twice every
quarter.
。
* Keep the welding cable plug contact is good
When you use should check the contact of the welding cable plug in.Fixed used by the operator to check
at least once a month once, in the mobile when using the inspection should be done before use
。
note
：
*Machine voltage is high, to prevent accidental electric shock during maintenance of the
safety measures. Not trained personnel are strictly prohibited to open the case
* If dust should cut off power supply before
* When the dust shall not be arbitrarily motivation inside wiring or damaged components.
ATTENTION
：
* The ‘Protection Indicator’ on the panel will be on after a long time operation, it shows that the inner
temperature is over the permitted data. The machine should be stopped using for some time to let it
cool down. It can continually use after the light is off.
* Cannot used the water cooler Tig torch to large current welding when without the water supply.
* Under the water cooler condition also need supply the argon.
* The power source, Argon valve and cooling water should be switch off after the operation or
leaving job site temporarily.
* Welders should dress canvas work suit and wear mask to prevent arc light and thermal radiation.
* Light separating screen should be put in the job site to prevent arc hurting other people.
* Inflammable or explosive materials are prohibited to access the job site.
* Every connector of welder should be connected correctly and grounded reliably
.