Svarog ARC 160-PFC, Руководство пользователя

Страница: 15 / 29

 Operation instruction under STICK mode.
a)
When welding stops, Press the
【
STICK/LIFT TIG switch key
】，
the STICK indicator lights
up
，
and it turns into STICK mode.
b)
under STICK mode ,Adjusting the
【
Multifunctional data adjusting knob
】
can change the
welding current during welding process, and displayed in
【
multifunctional data display
】
.
【
multifunctional data display
】
shows the preset current“080
A
”, its unit is ampere(A).
Chart 2: under STICK mode, preset current display with VRD enabled
c)
5 seconds later after setting the welding parameters, the
【
multifunctional data display
】
would flashes for one time, which means the data has been saved. Moreover, the panel
would display these data when restart the machine next time if the parameters keep
unchanged.
d)
When the input voltage is 95V~180V ,then current adjustment range is 20A~110A.And
when the input voltage is 180V~265V ,the current adjustment range is 20A~160A.

Operation instruction under LIFT TIG mode.
a)
When welding stops, press the
【
STICK/LIFT TIG switch key
】，
the LIFT TIG indicator lights
up
，
and it turns into LIFT TIG mode. LIFT TIG means the tungsten contacts the workpiece
first, then the arc is ignited by lifting the torch.
b)
Under LIFT TIG mode, Adjusting the
【
Multifunctional data adjusting knob
】
can change the
welding current during welding process, and displayed in
【
multifunctional data display
】
.
【
multifunctional data display
】
shows the preset current“080
A
”, its unit is ampere(A).
13