Use a vacuum cleaner to remove dust accumulations from the filter. If it is very dirty,
immerse in warm water and rinse a number of times. The water should never be hotter
than 40
℃
(104
℉
). After washing, leave the filter to dry then attach the intake grille to the
appliance.
START-END OF SEASON OPERATIONS
START OF SEASON CHECKS
Make sure the power cable and plug are undamaged and the earth system is efficient.
Follow the installation instructions precisely.
END OF SEASON OPERATIONS
To empty the internal circuit completely of water,
remove the cap(fig. 32).
Run off all water left into a basin. When all the water
has been drained, put the cap back in place.
Clean the filter and dry thoroughly before putting back.
Strictest operation enviroment:
Cooling mode: 18
℃
-
35
℃
(64
℉
-
95
℉
) , 30%RH~90%RH
Heating mode: 10
℃
-
25
℃
(50
℉
-
77
℉
), 30%RH~90%RH
TIPS FOR CORRECT USE
To get the best from your appliance, follow these recommendations:
● Close the windows and doors in the room to be air conditioned
(fig. 21).When installing the appliance semi-permanently, you
should leave a door slightly open (as little as 1 cm) to guarantee
correct ventilation;
● Protect the room from direct exposure to the sun by partially
closing curtains and/or blinds to make the appliance much
