Chevrolet Corvette Owner Manual (Holden-Localizing-Australia/New Zealand-
15749882) - 2022 - CRC - 9/20/21
Keys, Doors, and Windows
19
2. Press the touchpad once to release the
bonnet. The remote key must be within
1 m of the bonnet.
3. From the front of the vehicle, lift the
bonnet slightly until the gas strut
system automatically raises and holds it
in the fully open position.
4. The bonnet light and Open Bonnet
message will display in the Driver
Information Centre (DIC) when the
bonnet is open.
Opening The Bonnet When There Is No
Electrical Power
The manual release cable should only be
used for service and/or emergency use, such
as a loss of vehicle electrical power.
To enter the vehicle in the event electrical
power has been lost, see
“
Loss of Vehicle
Electrical Power
”
under
1. Locate the manual release cable loop
underneath the glovebox.
2. Pull the manual release cable twice to
release the bonnet.
3. From the front of the vehicle, lift the
bonnet slightly until the gas strut
system automatically raises and holds it
in the fully open position.
Emergency Bonnet Release Button
The under-bonnet compartment is equipped
with a glow-in-the-dark emergency bonnet
release button. This button will glow
following exposure to light. Press the button
to open the bonnet from inside the
under-bonnet compartment.
Closing the Bonnet
{
Warning
Do not drive the vehicle if the bonnet is
not latched completely. The bonnet could
open fully, block your vision, and cause a
(Continued)
