Chevrolet Corvette Owner Manual (Holden-Localizing-Australia/New Zealand-
15749882) - 2022 - CRC - 9/20/21
Infotainment System
127
Near Field Communication (NFC)
If equipped, Near Field Communication (NFC)
allows compatible smartphones to be paired
to the infotainment system. If your phone
does not support NFC pair the phone
manually as follows. To begin the pairing
process:
1. Refer to the smartphone's user manual
to verify it is NFC-compatible.
2. Unlock the smartphone.
3. Enable NFC on the smartphone if it is
disabled. The NFC icon should be in the
status bar of the smartphone.
4. Hold the smartphone 2.54 cm (1 in) or
less from the NFC sensor located above
the infotainment screen. See
5. Once pairing begins, a pop-up message
with a six-digit code will appear on the
smartphone and the infotainment
display.
6. Select Yes on the smartphone to confirm
the pairing process. A chime will sound
when pairing begins.
Multiple smartphones can be paired using
this technology.
Functionality varies by model and region.
Full functionality requires compatible
Bluetooth and smartphone, as well as USB
connectivity for some devices.
Pairing a Phone Manually
1. Make sure Bluetooth has been enabled
on the mobile phone before the pairing
process is started.
2. Touch the Phone icon on the Home Page
or the phone icon on the shortcut tray
near the bottom of the display.
3. Touch Phones at the top of the
infotainment display. There is also a
Connect Phones option in the middle of
the Phone display which will shortcut to
the Phone List menu.
4. Touch Add Phone.
5. Select the vehicle name shown on the
infotainment display from your mobile
phone's Bluetooth Settings list.
6. Follow the instructions on the mobile
phone to confirm the six-digit code
showing on the infotainment display and
touch Pair. The code on the mobile
phone and infotainment display will
need to be acknowledged for a
successful pair.
7. Start the pairing process on the mobile
phone to be paired to the vehicle. See
the mobile phone manufacturer's user
guide for information on this process.
Once the mobile phone is paired, it will
show under Connected.
8. If the vehicle name does not appear on
your mobile phone, there are a few
ways to start the pairing process over:
.
Turn the mobile phone's Bluetooth
off and then back on.
.
Go back to the beginning of the
Phone menus on the infotainment
display and restart the pairing
process.
.
Reset the mobile phone, but this step
should be done as a last effort.
9. If the mobile phone prompts to accept
connection or allow phone book
download, touch Always Accept and
Allow. The phone book may not be
available if not accepted.
10. Repeat Steps 1
−
8 to pair additional
mobile phones.