Suzuki UK110NE 2015 Скачать руководство пользователя страница 129

Страница: 129 / 144

8-3

BATTERY

1. Remove the battery from the motorcycle

by referring to the BATTERY section.

2. Clean the outside of the battery with a

mild detergent and remove any corro-
sion from the terminals and wiring har-
ness connections.

3. Store the battery in a room above freez-

ing.

TIRES

Inflate the tires to the normal specifications.

EXTERNAL

•

Spray all vinyl and rubber parts with rub-
ber preservative.

•

Spray the unpainted surfaces with rust
preventative.

•

Coat the painted surfaces with car wax.

PROCEDURE DURING STORAGE

Once a month, recharge the battery with a
specified charging rate (Ampere). Standard
charging rate is 0.7A × 5 – 10 hours.

PROCEDURE FOR RETURNING TO
SERVICE

•

Clean the entire motorcycle.

•

Reinstall the battery by referring to the
BATTERY section.

•

Adjust the pressure of tires as described
in the TIRE section.

•

Lubricate all places as instructed in this
manual.

•

Do the “INSPECTION BEFORE
RIDING” as listed in this manual.

Содержание UK110NE 2015

















































































































































Результаты поиска

Содержание UK110NE 2015

Отзывы:

Suzuki UK110NE 2015, Руководство пользователя, Страница: 129 / 144

Результаты поиска

Содержание UK110NE 2015

Отзывы: