Suzuki Intruder VZ1500, Руководство по обслуживанию

Страница: 188 / 580

1C-10 Engine Electrical Devices:
Specifications
Service Data
B940H21307001
FI Sensors
Tightening Torque Specifications
B940H21307002
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-8)”.
Item Specification Note
CKP sensor resistance 170 – 260
Ω
CKP sensor peak voltage 3.0 V and more When cranking
IAP sensor input voltage (F & R) 4.5 – 5.5 V
IAP sensor output voltage (F & R) Approx. 2.6 V at idle speed
TP sensor input voltage 4.5 – 5.5 V
TP sensor resistance
Closed Approx. 1.1 k
Ω
Opened Approx. 4.3 k
Ω
TP sensor output voltage
Closed Approx. 1.1 V
Opened Approx. 4.3 V
ECT sensor input voltage 4.5 – 5.5 V
ECT sensor output voltage 0.1 – 4.85 V
ECT sensor resistance Approx. 2.45 k
Ω
at 20
°
C (68
°
F)
IAT sensor input voltage 4.5 – 5.5 V
IAT sensor output voltage 0.1 – 4.6 V
IAT sensor resistance Approx. 2.5 k
Ω
at 20
°
C (68
°
F)
TO sensor resistance 16.5 – 22.3 k
Ω
TO sensor voltage
Normal 0.4 – 1.4 V
Leaning 3.7 – 4.4 V When leaning 65
°
GP switch voltage 0.6 V and more From 1st to Top
Injector voltage Battery voltage
STP sensor input voltage 4.5 – 5.5 V
STP sensor output voltage
Closed Approx. 0.6 V
Opened Approx. 4.2 V
STV actuator resistance Approx. 7
Ω
HO2 sensor output voltage
0.4 V and less at idle speed E-02, 19, 24, 33
0.6 V and more at 4 000 r/min E-02, 19, 24, 33
HO2 sensor heater resistance 4.0 – 5.0
Ω
at 23
°
C (73
°
F)
PAIR solenoid valve resistance 18 – 22
Ω
at 20 – 30
°
C (68 – 86
°
F)
EVAP system purge control solenoid
valve resistance
Approx. 32
Ω
at 20
°
C (68
°
F) E-33 only
Fastening part
Tightening torque
Note
N
⋅
m kgf-m lbf-ft
TP sensor mounting screw
3.5 0.35 2.5
)
(Page 1C-2) /
)
(Page 1C-3)
IAT sensor mounting screw 1.3 0.13 1.0
)
(Page 1C-3)
ECT sensor 18 1.8 13.0
)
(Page 1C-4)
Water hose clamp screw 1.5 0.15 1.0
)
(Page 1C-5)
STP sensor mounting screw
3.5 0.35 2.5
)
(Page 1C-7) /
)
(Page 1C-8)