Suzuki Intruder VL800 Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 142

Suzuki Intruder VL800 Скачать руководство пользователя страница 101

7-40

6. Slide the front wheel forward.

NOTE: Never squeeze the front
brake lever with the wheel
removed. It is very difficult to force
the pads back into the caliper
assembly.

7. To reinstall the wheel assem-

bly, reverse the sequence
described above.

8. After installing the wheel,

apply the front brake several
times to restore the proper
lever stroke.

Front axle tightening torque:
65 N·m (6.5 kgf-m, 47.0 lbf-ft)

Front axle holder bolt tightening
torque:
33 N·m (3.3 kgf-m, 24.0 lbf-ft)

NOTE: Be careful not to damage
the oil seal when installing the
front wheel.



WARNING

Failure to extend brake pads
after installing the wheel can
cause poor braking perfor-
mance and may result in an
accident.

Before riding, “pump” the
brake lever repeatedly until the
brake pads are pressed against
the brake disks and proper
lever stroke and firm feel are
restored. Also check that the
wheel rotates freely.



WARNING

If the bolts and nuts are not
properly tightened, the wheel
can come off, causing an acci-
dent.

Be sure to tighten the bolts and
nuts to the specified torque. If
you do not have a torque
wrench or do not know how to
use one, ask your authorized
Suzuki dealer to check the
bolts and nuts.

«
...
99
100
101
102
103
...
»

Содержание Intruder VL800















































































































































Отзывы:

Нет отзывов