Suzuki GSF1200 2001, Руководство по обслуживанию

Страница: 262 / 368

ELECTRICAL SYSTEM 6-35
B/R B
SPEEDOMETER INSPECTION
If the speedometer, odometer or tripmeter does not function prop-
erly, inspect the speed sensor and the coupler connections. If the
speed sensor and coupler connections are OK, replace the com-
bination meter with a new one.
SPEED SENSOR INSPECTION
• Remove the frame side cover (left side). (
!
5-6)
• Disconnect the speed sensor coupler.
• Remove the speed sensor
1
.
• Connect a 12 V battery (between B and B/W), 10 k
Ω
resistor
(Between B/R and B) and pocket tester (tester
+
probe to B
and tester
-
probe to B/R) as shown.
B/R : Black with Red tracer
B/W: Black with White tracer
B
: Black
#
09900-25008: Multi circuit tester set
'
Tester knob indication: Voltage (
& & & & &
)
• Move a screwdriver back and forth across the pick-up surface
of the speed sensor. The voltage readings should cycle as fol-
lows (0 V
→
12 V or 12 V
→
0 V). If the voltage reading does not
change, replace the speed sensor with a new one.
NOTE:
While testing, the highest voltage reading should be the same as
the battery voltage (12 V).
Speed Sensor
OIL PRESSURE INDICATOR INSPECTION
• Remove the signal generator cover. (
!
3-13)
• Disconnect the oil pressure Green/Yellow lead wire from the oil
pressure switch.
• Turn the ignition switch to the “ON” position.
• Check if the oil pressure indicator lights up when grounding the
Green/Yellow lead wire.
If the oil pressure indicator does not light up, check the couplers.
If all of the connections are OK, replace the oil pressure indicator
with a new one.
• After checking the oil pressure indicator light, install the signal
generator cover. (
!
3-48)
G/Y
To oil
presure
switch
ON