Suzuki GS500E, Руководство по обслуживанию

Страница: 405 / 440

GS500K4/FK4 (’04-MODEL) 20-27
WIRING HARNESS AND HOSE ROUTING
WIRING HARNESS ROUTING
Clamp
Clamp
Clamp
Clamp
Clamp
No slack
Starter relay
Air cleaner box
Clamp
Clamp
Clamp
Side-stand switch
Pass the lead wire
underneath the frame.
Do not allow the
wiring harness to
contact with the
fuel tank bracket bolt.
Keep clearance between the regulator
lead wire and helmet holder.
Pass the turn signal
light lead wire between
the frame and rear fender.
No slack.
Clamp
Clamp
Clamp
Clamp
Ignition coil (LH)
Ignition coil (RH)
Spark plug cap
Ignition coil lead wire
Clutch cable
Throttle cable
Wiring harness
Neutral switch
Regulator
(Pass the regulator
lead wire under
the wiring harness) Clamp the wiring harness at
blue tape on the wiring harness.
Regulator
Side stand relay
Turn signal relay
Side stand switch
coupler must be located
over the starter relay
coupler.
Rear brake light switch
Solenoid
TPS
A
B
Pass the combination
meter lead wire above
the handlebar switch
lead wires.
Pass the solenoid lead wire
between the air cleaner box
and solenoid.
Battery
+
lead
wire
Rear turn signal
light (LH)
Wiring harness
Neutral
switch
coupler
Rear brake
light switch
For GS500/U
Starter motor
Side-stand switch
Neutral switch