Suzuki FD 110 XC, Руководство по обслуживанию, Страница: 191 / 193

7-28 SERVICING INFORMATION
TRANSM DRIVE CHAIN Unit: mm
CARBURETOR Unit: mm
ELECTRICAL
ITEM STANDARD LIMIT
Primary reduction ratio 3.666 (77/21) --------------
Final reduction ratio 2.428 (34/14) --------------
Gear ratios Low 3.000 (33/11) --------------
2 nd 1.875 (30/16) --------------
3 rd 1.368 (26/19) --------------
Top 1.052 (20/19) --------------
Shift fork to groove clearance No. 1, No. 2 0.1-0.3 0.50
Shift fork groove width No. 1, No. 2 4.5-4.6 --------------
Shift fork thickness No. 1, No. 2 4.3-4.4 --------------
Drive chain Type DID428 --------------
Links 98 links --------------
20-pitch length -------------- 259
Drive chain slack 15-25 --------------
ITEM STANDARD
Carburetor type MIKUNI 17
Bore size 17 mm
I.D. No. 09GF1
Idle r/min. 1,500±100 r/min
Float height 16
Main jet (M.J.) #92.5
Main air jet (M.A.J.) 1.65
Jet needle (J.N.) 4PA11-2
Needle jet (N.J.) E-OM
Pilot jet (P.J.) #15
Pilot outlet (P.O.) 07 mm
Air screw (A.S.) 1 1/2 turns out
Valve seat (V.S.) 1.5 mm
Starter jet (G.S.) #30
ITEM STANDARD LIMIT
Ignition timing 15° B.T.D.C. Below 1,500 r/min.
Spark plug
Type NGK: CR6HSA
Gap 0.6-0.7 mm
Spark performance Over 8 at 1 atm.
Ignition coil resistance
Primary (+) tap-Ground 0.3-1.1
Ω
Secondary Plug cap-Ground 11 – 18 k
Ω