Suzuki AN650 Скачать руководство пользователя страница 40

Страница: 40 / 125

2-29

FRONT TRUNK

To open the lid:
1. Insert the ignition key and turn it

counterclockwise to unlock the
latch lever.

2. Pull the latch lever.

To close the lid:
1. Push the box lid firmly until the

latch snaps into the position.

2. Turn the ignition key clockwise to

lock the latch lever.

3. Remove the key.
4. Pull the latch lever and check that

the box lid is locked.

The box load capacity is 1.5 kg (3.0
lbs).



WARNING

If the box lid is not locked, it may
open while riding.

Make sure the box lid is closed
and locked securely.



WARNING

Opening the box lid while riding
can be hazardous. Removing a
hand from the handlebars can
reduce your ability to control the
motorcycle.

Always keep both hands on the
handlebars during operation.

Содержание AN650






























































































































Результаты поиска

Содержание AN650

Отзывы:

Похожие инструкции для AN650

Бренды по названию

Популярные бренды

Suzuki AN650, Руководство пользователя

Результаты поиска

Содержание AN650

Отзывы:

Похожие инструкции для AN650

Бренды по названию

Популярные бренды