Suzuki AN650 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 125

Suzuki AN650 Скачать руководство пользователя страница 39

2-28

Use fresh gasoline when filling up the
fuel tank. Do not use bad gasoline
which is contaminated with dirt, dust,
water or other liquid. Be careful that
dirt, dust or water does not enter the
fuel tank when refueling.

NOTE: The fuel tank has a pressure
regulator around the fuel tank inlet to
release pressure when the fuel tank
becomes hot. The fuel tank pressure
regulator may whistle when it
releases fuel tank pressure.

NOTE:
•

When refueling, hold the tip of fuel
nozzle against crossbar in fuel
inlet as illustration.

•

Stop filling the fuel tank after the
fuel nozzle automatically clicks off.
Do not try to “top off” the fuel tank.
Leave some room for the fuel to
expand from temperature
increase.



WARNING

Failure to follow safety precau-
tions when refueling could result
in a fire or cause you to breathe
toxic fumes.

Refuel in a well ventilated area.
Make sure the engine is off and
avoid spilling fuel on a hot engine.
Do not smoke, and make sure
there are no open flames or
sparks in the area. Avoid breath-
ing gasoline vapors. Keep chil-
dren and pets away when you
refuel the motorcycle.

«
...
37
38
39
40
41
...
»

Содержание AN650






























































































































Отзывы:

Нет отзывов