Suzhou Monarch Control Technology MCTC-CTB-A, Руководство пользователя

Страница: 147 / 183

NICE3000 User Manual Function parameter description
147
Code Display Code Display
00 0 10 A
01 1 11 B
02 2 12 G
03 3 13 H
04 4 14 L
05 5 15 M
06 6 16 P
07 7 17 R
08 8 18 -
09 9 19 No display
20 12 21 13
22 23 ≥22 No display
For example:
Actual floor
Required
displaying
Higher 2 bit setting Lower 2 bit setting
Corresponding
function code setting
Basement 1 -1
‘
-
’
corresponding
code 18
‘
1
’
corresponding code
01
1801
Floor 1 G
No display,
corresponding
code19
‘
G
’
corresponding code
12
1912
Floor 2 2
No display,
corresponding code
19
‘
2
’
corresponding code
02
1902
Floor 14 13A
‘
13
’
,
corresponding code
21
‘
A
’
corresponding code
10
2110
FE-31 can
’
t only set the floor 31 hall displaying content, but also can express the opposite
door plural selection hall call function. When FE-31 setting value isn
’
t less than 10, it
expresses the floor 31 hall corresponding displaying content. If the highest floor is less than
floor 29(F6-00<29) when FE-31 setting value is less than 10, it expresses that one floor below
floor 10 is double door and double hall displaying. Set the on-off switch address of back
door hall call panel as 31, the system can differentiate front door and back door. At this time,
FE-31 setting parameter expresses the corresponding floor of the hall call panel on-off switch
setting31.
For example: the highest floor is floor 10, the lowest floor is floor 1, and floor 2 is the double
door with hall call displaying panel and button. At this time, set FE-31 as 2. In this way, the
two display panels of on-off switch setting address 31 and 2 both can be used for the hall
call displaying panel of floor 2. But in this condition, the two hall calls have the same calling
function, can
’
t control front door and back door all by itself.