NOTE:
Remove all parts and hardware from the box along
with any plastic protective packaging and carefully lay all the
parts out on a clean, flat surface.
DO NOT discard any contents until after assembly and
installation is complete to avoid accidentally discarding small
parts or hardware.
Recommended Location for Use: Dry Indoor Environment
Assembly Time: 10 Minutes
PARTS
Check to make sure you have the following:
WARNING: In accordance with the UL Standard,
to reduce the risk of fire, the Shade should be open
on the top and bottom. The Critical Radius (CR)
should not be less than 3”.
INCLUDED:
Page 2 of 3
Critical
Radius
Shade
NOT INCLUDED:
1-150 Watt Max Type A Bulb or
1-Lamp Base (A)
Lamp Shade
1-
Harp (C)
Harp
1- Lamp Shade (B)
Lamp Base
1-
Finial (D)
1-30 Watt Max CFL Bulb
Saddle
