Page 3 of 3
STEP 1:
NOTE: Before starting assembly of this Lamp, be sure it has been unplugged.
Turning the switch off is not sufficient enough.
Squeeze the Harp (C) ends into the
Saddle of the Lamp Body (A).
STEP 2:
Place the Shade (B) over the Harp (C) top.
Secure it on top by screwing on the Finial (D)
until it is snug.
STEP 3:
Screw in Bulb. This Lamp has been rated for up
to a 150 Watt MAX Type A Bulb or 30 Watt Max
CFL Bulb (NOT Included).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
Avoid the use of harsh or abrasive
chemicals as they may damage the finish
(A)
(C)
(B)
(D)
(C)
Saddle
