28
At this time, perform your precheck making sure
that:
the Spyder operates and provides a complete
display
the low battery indicator is not on
the altitude and personal adjustment settings
are correct
the instrument displays correct units
the instrument displays correct temperature and
depth (0,0 m [0 ft]).
the buzzer beeps
you have preset desired displays on the User
Definable Display Field (See section 4.2.4
Presetting Displays and Alarms).
The Spyder is now ready for diving.
NOTE: The surface interval time does not run be-
fore the first dive.
After activation of the Dive Mode or after diving,
the Spyder will automatically switch to show the
time keeping display within 10 minutes to
conserve the battery power, if you do not press
any buttons. However, the dive computer func-
tions will remain active until it has calculated
Fig 4.6 Startup IV. The Surface
Mode is indicated by the SURF
text and mode indicators.
Содержание Spyder
