Suunto Spartan, Руководство пользователя

Страница: 33 / 46

33
• field 2 displays the atmospheric pressure; and
• field 3 displays the time and to the left the text “memory”.
• the outer Circumference graphically displays the atmospheric pressure where one full circle equals
100 mbars or 1 inHg.
to view the information compiled in the 4-day memory:
PRESS the [-] button to scroll back down in increments of one hour for the first six hours, after that increments
are 6 hours.
PreSS the [+] button to scroll back up.
Note: Replacing the battery will not erase this information.
4.3. sea leVel pressure sub Mode
Sea level pressure is pressure relative to sea level where as the pressure read in the main barometric display
is absolute pressure in the current location.
In the Barometer mode, PreSS the [Select] button three times to enter this sub mode.
In the sea level pressure sub mode (fig. 25):
• field 1 displays the text “Sea”;
• field 2 displays the current sea level pressure; and
• field 3 displays the current time.
4.3.1. setting the sea level pressure
Setting the sea level pressure can be used in setting the altitude measurement on the Wristop Computer if
the altitude is not known.
to set the sea level pressure:
1. PreSS the [Select] button and hold in for 2 seconds. located in field 2, the current sea level pressure
will begin to flash.
2. PreSS the [+] button to scroll the pressure upward or
PreSS the [-] button to scroll the pressure downward.