manualshive.com logo in svg

Suunto Spartan, Руководство пользователя

Поделиться
Скачать
Suunto Spartan Скачать руководство пользователя страница 27

27

•  the outer Circumference displays graphically the altitude in hundreds of meters or feet over a full thousand 

where one complete circle is equivalent to 1000.

to view the information compiled in the 24-hr memory:
1.  PreSS the [-] button to scroll back down in increments of one hour and view the vertical ascent/descent 

rate and the altitude for that particular hour.

2.  PreSS the [+] button to scroll back up.

Note: Replacing the battery will not erase this information.

3.4.  loGbooK sub Mode

In the altimeter mode, PreSS the [Select] button three times to enter this sub mode. the logbook mode features 

five displays. The displays automatically rotate showing the first display for 7 seconds then proceeds showing 

displays 2 through 5 at 4 second intervals.
In the first display (Fig. 12):
•  field 1 displays the year;
•  Field 2 displays the text “LO” with the current logbook number flashing; and
•  field 3 displays the month and day of the particular logbook number. to the left of the month/day, is the text 

“log Book”.

the user can PreSS the [-] to scroll down to view previous logs captured and then PreSS [+] to scroll up to 

the current logbook.
the second display shows the ascent information for the particular logbook that is being viewed (fig. 13).
•  field 1 displays the average ascent rate during the event;
•  field 2 displays the total vertical ascent ; and
•  field 3 displays the text “aSC” along with the text “log Book” to the left.
the third display shows the descent information for the particular logbook that is being viewed (fig. 14).
•  field 1 displays the average descent rate during the event;
•  field 2 displays the total vertical descent; and

Содержание Spartan















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды