Sutter Instrument BV-10, Руководство по эксплуатации, Страница: 11 / 38

BV-10 OPERATION MANUAL – REV. 3.00 (20180423)
9
1.5.2 Manipulator
The manipulator is used for advancing a pipette to the grinding surface. It consists of an
angle plate used to clamp the pipette and adjust the bevel angle; a coarse control knob used
to position the pipette just above the grinding plate surface; a fine control knob (micrometer)
used to control the actual beveling of pipettes. The sensitivity of the fine control can be
varied by moving the pointer near the back of the manipulator. It is factory pre-set to 1 (mid-
point on the scale) for average beveling. Moving the pointer towards 0 will reduce the
micrometer advance rate.
Figure 1-1. Manipulator.