Sutron TesiMon TM1500, Руководство пользователя

Страница: 18 / 26

Interfaces of the Device
4-2
4.2 Shielding D-SUB Connectors
You must shield D-SUB connectors as follows:
Figure 4-2 Shielding D-SUB connectors
1 D-SUB connector
2 Shield
3 Cable clip
4 Cable
The shield must be folded back into a flat position over the cable sheath.
When fastening the cable with the cable clip, as much of the shielding as possible
must be in contact with the housing and sufficient strain relieve must be ensured.
4 nc Not Connected
5 GND Ground
6 GND Ground
7 GND Ground
8 GND Ground
9 VGA 5V VCC, Fused
10 GND Ground
11 nc Not Connected
12 VGA SDA DDC Data
13 CRTHS Analog HSYNC
14 CRTVS Analog VSYNC
15 VGA SCL DDC Clock
Table 4-2 Pin assignment - VGA
Pin Designation Function