background image

SWD050 Inclusive Roundabout 

Outer Gap Adjustment Instructions

To gain access underneath the roundabout for adjustment,
first remove the 4 countersunk screws from the centre pole 
and remove it. 

Secondly, remove all of the security screws on the outer 
legs on the handrail, and the 4 holding the bump stops 
in place (leave the screws in the inner legs otherwise the 
handrail will come off the roundabout altogether). This will 
disconnect the decks and handrail from the frame.
 

Once all the outer security screws 
have been removed, the deck and 
handrail assembly can be lifted off 
the frame in one piece. 

There are two ways to adjust the 
roundabout for smooth running. The 
guide wheels can be ajusted and 
the outer rings can be adjusted.

First check the track and wheels. 
Ensure the track is clean and free 
from debris and the wheels are in 
good condition and running freely. 
It's important that the roundabout 
is held centrally on the track. If it is 
not then adjust the guide wheels. 
The guide wheels are fixed to the 
frame with a slotted bracket. By 
loosening the two M10 bolts, the 
guide wheels can be adjusted as 
required to ensure the the rounda-
bout is held centrally on the track.

If after checking the wheels, the 
roundabout is still rubbing on the 
outer ring or the gap is larger than 
8mm the outer rings can be adjust-
ed. 

Sheet 4 of 6 Rev 01

Отзывы: