• LIQUID LEVEL / LWCO CONTROLLER
The electronic controller automatically maintains proper
water level, and shuts off the generator when water
supply in the boiler drops below a safe operating level.
• WATER LEVEL SIGHT GLASS
Allows constant observation of water level while
boiler is in operation.
• ON-OFF SWITCH
Complete with pilot light, for switching on the
generator.
• INTEGRAL ELECTRICAL CONTROL
Magnetic contactors energize the elements and
are integrally mounted in the control unit.
• BLOWDOWN/DRAIN VALVE
Facilitates emptying the pressure vessel during
blowdown/drain sequence.
• J-BOX
for motor/pump connection.
• LONG LIFE HEATING ELEMENTS
Industrial grade, heavy duty stainless steel heating
elements equipped with one piece resistance welded
terminations for added strength and safety.
• OPERATING PRESSURE CONTROL
Operates automatically to maintain steam pressure
within generator.
• MANUAL RESET PRESSURE CONTROL
Provides high limit pressure cut-out with manual reset.
• STEAM SAFETY VALVE
ASME Code valve, automatically opens to reduce
pressure should excessive steam cause pressure build-up.
• STEAM PRESSURE GAUGE
Allows visual observation of steam pressure over full
range.
• ENERGY SAVING AND MINIMUM
MAINTENANCE
Fully insulated pressure vessel minimizes heat loss
and maximizes energy savings.
• EASY CONTROL MAINTENANCE
All controls and components are easily accessible.
Fully-louvered openings avoid component heat build-up.
• RUGGED CONSTRUCTION
Performance is insured for all typical industrial
applications.
ES 30A - ES36A - HP 30A Electric Steam Generator
Installation, Operation and Maintenance Manual
_____________________________________________________________________________
2
Standard Features
Meeting Code Requirements
•
Pressure vessel rated at 100PSIG to ASME Section I,
Code M and National Board registered.
•
UL listed, cUL certified built to NEC.
•
Units are trimmed at 100PSIG as standard.
15PSIG trim also available.
•
Incoming water line pressure must be 10 PSIG
greater than generator operating pressure. If not, a
motor/pump must be used. Specify Sussman ES
38002A high pressure water feed motor/pump system.
•
When ordering specify Model No., KW,
Volts/PH and motor/pump if required.
•
Water Connection is 1/4” NPT.
