Note: The static pads can be moved along the frame using a rotating motion. Position the static
pads to best fit the watercraft.
Page 4
EZ Roller™ V
-Rack
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Step 5: Load Kayak or Canoe or up to three SUPs
(watercraft) from the back of vehicle so that the first
point of rack contact is on the rotating pads (side with
yellow collar). (fig. 5)
•
Push watercraft forward along the rollers.
•
Gently allow watercraft to pivot down to contact
the front rack.
•
Adjust position of watercraft so it is centered
fore
-
aft on the crossbars.
•
Adjust position of the watercraft so it is centered
left
-
right on the V
-
Racks.
5
Step 6: Strap Watercraft to Vehicle
•
Start from the side of the car. Pass buckle end through the open loop of the V
-
Rack. (Fig. 6)
•
Toss the free end of the strap over the watercraft. From the other side of the vehicle, thread the
strap around the crossbar such that the strap is inside the V
-
Rack loop. (Fig. 7)
•
Toss the strap back over the watercraft.
6
7
5
