Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
OUR PLEDGE TO YOU
For Technical assistance or Replacement parts: call 866.787.7369
Page 2
3-boat Frame
Attaching Arms to Frame
Parts Needed:
Hardware Bag E
3
-
Boat Rack
All 3 sets of arms will be bolted directly to the front
side of frame, using
Hardware Bag E.
4 to 6
-
Boat Double
-
Sided Rack
3 sets of arms will be bolted to the front side of
frame and 1
-
3 sets will be attached to the back side
of the frame using Free
-
Standing Brackets (sold
separately).
As a starting point, attach first set of arms to the
lowest point possible to the front of frame. Place 1st
boat onto the bottom set of arms. Position 2nd set
of arms to allow space to lift the lower boat on and
off the rack. Repeat this process on back side of
frame.
Note: See Wall Rack Instruction Sheet for more
details.
Assembly
Step 3: Post Attachment
Parts Needed: 4 28”
Posts
,
Hard-
ware Bag C
•
Insert the
Post
without the
black plastic cap into
Base
Post.
Secure with both sets
of
Hex Bolt
s,
Lock Washers,
and
Washers
.
Customizing your 3
-
Boat Frame
This 3
-
Boat Frame is completely modular making it super easy to add or modify it as your needs change. It
easily expands to hold up to 6 kayaks, canoes, and/or SUPs. Add casters to make a rolling rack or add a paddle
rack to store your paddles.
Check out the options to customize your rack at www.Suspenz.com
Tower Spacing
The length of your boat will determine tower
spacing. Ideal rack spacing is 40% of total boat
length, (boat length x 0.4 = spacing).
Feet Adjustments
Adjust
Leveling Feet
so that both towers are level.
Once the leveling feet are adjusted, screw the top
Hex
Nut
up to base snugly, this is done so the foot will not
change height.
If you have not yet opened your cold beverage,
this would be an appropriate time to do so.
Suspenz
®
products are warrantied for life against defects in material or workmanship to the original owner. Product must be
used for its intended purpose under normal conditions. Please visit www.Suspenz.com for complete warranty
information.
•
Insert the
Post
with the black plastic cap
into
Post
and secure with both sets of
Hex Bolt
s,
Lock Wash-
er
s and
Washer
s.
Note: Put
Lock Washer
then
Washer
onto
Hex Bolt
so
Washer
is against the
Post
.
Repeat for second tower.
