Survivor MMR-88 DAB, Инструкция по эксплуатации

Страница: 6 / 17

5
Recharging the radio
Note:
Please use one of the following methods to recharge your radio or when
the battery power indicator LED blinks indicating the battery power is
low.
1. Using the supplied USB to Micro USB cable simply plug the USB end
into a USB socket on a computer, tablet or any USB power supply.
Then plug the Micro USB end into the Micro USB socket on the right
hand side of the radio.
2. Using an AC adapter with a Micro USB connector (not supplied) plug
the AC adapter into a standard AC outlet. Then plug the Micro USB
end into the Micro USB socket on the right hand side of the radio. The
battery power icon will illuminate showing that charging is in progress.
The CHARGE LED indicator will also be on at the same time during
the charging process.
NOTE:
The radio will begin charging the Lithium-ion battery. Charging time will
take approx. 2 hours to be fully charged. The battery power icon will
stop flashing when the radio is fully charged. Reduced power, distortion,
stuttering sounds or when the battery power indicator light is low are all
signs that the battery needs to be recharged.
NOTE:
The radio can play approx. 10 hours when the battery is fully charged.
Using Dynamo power
1. Make sure the telescopic antenna is in the rest position before rotating
the dynamo handle.
2. Take the Dynamo power handle from its rest position.
3. Rotate the Dynamo power handle approx. 120 rotations per minute,
either clock-wise or counter-clock wise until the charging LED indicator
appears red.
4. Under normal listening conditions, one minute of charging from
Dynamo power will allow you to listen to the radio for approx. 5-7
minutes.
5. Make sure the handle is in its rest position after charging is completed.