Survivor MMR-88 DAB, Инструкция по эксплуатации

Страница: 12 / 17

11
Operating your radio-FM (Manual tuning)
1. Carefully straighten the antenna and turn on the radio by pressing the
Power button.
2. Press the Band button to select FM radio mode.
3. Press the Tuning up/down button to control the frequency that the
radio will tune to. The frequency will change in steps of 50KHz. When
the end of the waveband is reached the radio will recommence tuning
from the opposite end of the waveband.
4. Press the Volume buttons to adjust the sound level as needed.
5. To switch off your radio, press the Power button.
Scan tuning-FM
1. Press and hold the Tuning up/down button.
2. The radio will search in an upwards or downwards direction until
it finds a station of sufficient signal strength. If the signal is strong
enough and there is RDS data present then the radio will display the
station name. When the waveband end is reached, your radio will
recommence tuning from the opposite waveband end.
Service information-FM RDS
Your radio has a range of display options when in FM mode:
1. Press and release the Info/Menu button to cycle through the different
options.
a. Radio text-
Displays scrolling text messages such as artist/track
name, phone in number etc.
b. Program type- Displays the information for the station being listened
to e.g. Pop, Classic. News, etc.
c. Frequency-
Displays the frequency of the FM signal.
d. Audio type- Displays the audio type of the station being listened to.
e. Date- Displays the current date.
Note:
If no RDS information is available, the radio will be unable to display the
station name, radio text and program type information.
The radio only provides displays when there is information available.
The stereo speaker display shows that the radio is receiving a stereo
broadcast.