EonServ 5000 Series
15
c.
To remove the driver, execute the sudo sh ift_driver_install.sh r command,
where the "r" in the name means "remove".
Note: If driver removal or update fails, you may need to release the vscsihba
module by doing the following:
Ensure all vscsihba processes are stopped.
Ensure that all partitions created using the storage management tool have
been unmounted.
If the vscsihba module is not released even after the above steps are done,
restart EonServ.
3.
Installing management software
–
EonOne Lite
When the operating system and all the necessary drivers are properly installed, you can
install EonOne Lite to get started with array management for EonServ 5000.
Updating System
Updating the firmware and BIOS
If you need to update the firmware and BIOS, use the management software. For the latest
To update the firmware and BIOS:
1.
From EonOne Lite tool, go to Settings > Download.
2.
Tick Upload Firmware or Upload firmware and boot record and look for the firmware,
then click OK.
