www.surveon.com
24
Surveon SMR2006/2010
3.7. Configuring an IP Address for NVR Server
Before NVR Server can run successfully, an IP address must be properly bundled
with it.
Note:
(1)
You may skip these steps if your routing devices have DHCP
capabilities. (2) If you don’t set the fixed IP in the VMS Console first, a
warning massage will prompt out.
1.
Login to the VMS Console, right click the NVR Manager and click edit to
set a fixed IP address for your NVR Server.
2.
Right-click the VMS Server and select
Configurations> DHCP Server.
3
. Click
Enable
and then
OK
to confirm the setting.
Restart the system to have the setting effective.
