www.surveon.com
18
Surveon SMR2006/2010
4.
Close the front flap of the front panel.
Make sure the front flap is
closed properly to ensure that the connector at the back of the hard
drive is firmly connected to the corresponding connector on the
backplane board.
5.
Once all drive trays are properly installed, the SMR system will
recognize the disk drives and scan them in automatically during the
power-on procedure.
3.3. Cabling
Connect cables to the rear panel ports as follows.
1
2
U S B P o r t
L A N P o r t
VGA Port
Insert mouse, keyboard or other external devices to the USB port to
operate the Video Management Software (VMS).
Insert the LAN cable to the upper LAN port to connect the SMR to a
local network where your IP cameras reside.
(Connection to analog cameras is also available via an IP encoder.)
Connect an external monitor capable of 32bit or higher color quality
to the VGA Port to view the VMS interface.
Connect the power cord with the power adapter to the power port
and available outlet.
Note:
(1)
The LAN cable should be prepared by users. (2) Users can only use
the upper LAN port.