Surveon CAM4210, Руководство пользователя

Страница: 36 / 58

Surveon CAM4210
PTZ
RS-485 is a control standard that is used as a basis for controlling point-tilt-
zoom (PTZ) cameras or mounts. The PTZ menu Settings> PTZ> RS-485
Settings allows configuration of the RS-485 controls.
The following parameters are configurable:
•
Baud rate - The baud rate to be used with the RS-485 device. Options
are 2400, 4800, 9600, 19200, 11520 bd.
•
Enable PTZ - This check box activates PTZ service, allowing PTZ
controls to be displayed.
o
PTZ decoder address - The address of the PTZ decoder, which
decodes commands and turns them into electrical signals to
drive the PTZ mechanism. This address is a discreet number
based on PTZ decoder's connection.
o
PTZ protocol - The protocol used by the PTZ. Two of the most
common protocols are supported: Pelco-D and Pelco-P.
Click OK to save or Cancel to abort the changes before you leave the page.
www.surveon.com
34