11
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.
SERVICE
Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
PLANER/JOINTER
Read the entire text of the operating instruc-
tions prior to the assembly and operation of
the device.
These operating instructions are intended to
make it easier for you to get familiar with your
device and utilize its intended possibilities of
use.
The operating instructions contain important
notes on how to work safely, properly and eco-
nomically with your machine and how to avoid
dangers, save repair costs, reduce downtime,
and increase the reliability and working life of
the machine.
• When you unpack the device, check all parts
for possible transport damages.
• Read the operating instructions to make
yourself familiar with the device prior to using
it.
• Only use original parts for accessories as well
as for wearing and spare parts.
• Be careful when working: Risk of injury for
fingers and hands through the rotating cutting
tool.
• When working on the machine, all guards
and covers must be fitted and in working posi-
tion.
• Do not overload the machine and only use
it within the performance range specified in
the chapter Technical Data of the operating
manual.
• When working outside, do not stand on slip-
pery ground and wear solid shoes.
• Do not misuse the cable. Protect it from heat,
oil, and sharp edges.
• Only use well-sharpened planing knives for
better and safe work.
• Maintain the handles dry, clean and free
from oil and grease.
• Before switching on the machine, remove all
keys and setting tools.
• Do not use the machine in a humid or wet
environment.
• Wear only close-fitting clothes. Remove rings,
E N G L I S H •
User's manual
CN506 manual.indd 11
23/06/15 17:07
