Front Panel
1. VOLUMN CONTROL
2. LED Indicator
a)
Port&Clip
Protection indicator will light on in orange once the amplifier comes into protection status. The protection maybe resulted from
speaker line short circuit, speaker line open circuit, amplifier overload and inner working temperature over 55
℃
, this indicator give
visually guidance ask for repair and It will light off once these failures been repaired. There are two separate protection indicators for
each two channels.
Clip indicator will light on in red once the input or output is too high. There are two separate CLIP indicators for each two channels.
b)
-10DB
-10DB will light on in green once there is any input signal increase
c)
SIG
SIG indicator will light on in green once there is input signal has been passed.
d)
ON
Power indicator will be on when power on the equipment.
3. Power switch
Power indicator will be on when power switch on
.
6
/
9
