Page
4
of
7
Working with ARCAM
1.
You can turn ARCAM on by pressing and holding the on/off
button located on the right side. You can release the button as soon
as you see the loading screen.
(the firmware version is displayed at the bottom of the loading
screen)
Upon successful loading, ARCAM automatically starts scanning the spectrum.
Every detected suspicious signal is displayed on the "main screen" as a
coloured "cell" with two rows of numbers inside. The coloring indicates the
probability of correct match with the database (brighter colours indicate
higher probabilities).
«Main screen» consists of 3 pages of 25-cell arrays, which
limits the number of simultaneously detectable signal to 75.
Page number is displayed in a top-left corner. You can
navigate through pages by pressing either ">>" or "<<"
buttons, which can be found at the bottom of the "main
screen". Battery charge level is displayed at the top-right
corner of the main screen.
2.
You can select any detected signal by pressing on a "cell"
(selected cell will be marked with white outline), which will give
access to "B/W" and "Info" option buttons.
«B/W»
- Will add the selected "cell" to "white list". Selected cell
will be marked and transferred to the end of the array at the last
page.
«Info»
– Will activate the localization mode, which is used to
localize the source of the signal by level.
Содержание ARCAM
Страница 1: ...ARCAM Spy Camera Detector USER S MANUAL ...
