38
Care and Maintenance
EN
1. Switch device off.
2. Disconnect device from power supply. For this, pull the mains plug from the
mains socket.
3. Remove the power connection cable from mains socket.
4. The fuse holder is located next to the mains socket.
5. Remove the fuse holder as shown in Fig. 9-2 "Opening the fuse holder".
6. Undo the latch of the fuse holder with two fingers.
7. Remove the fuse holder.
8. Check fuse.
9. Insert a new fuse. Use only the specified type of fuse (see chapter 13 "Techni-
10. Insert the fuse holder until it can be heard snapping into place.
11. Reconnect the device to the power supply. For this, insert the mains plug into
the mains socket.
Fig. 9-2
Opening the fuse holder
Содержание AirSeal iFS
