13
Main Unit
Wipe with a dry, soft cloth for stubborn stains or dirt. Do not use
volatile fluids, benzene, paint thinner or
polishing powder
as this may damage the surface.
Do not use detergents as detergent ingredients may also damage the unit. Keep the unit away from water.
Replacing the HEPA-Rx filter
When the third circle on the sensor plate flashes, the HEPA-Rx filter needs to be replaced.
1.
Stop the operation and unplug the unit.
2.
Open the bottom plate, disconnect the power cord from
the
UV-C+ lamp, take off the unit lock.
3.
Take out the used HEPA-Rx filter and replace with a new one.
4.
After replacing the HEPA-Rx filter, hold the POWER button for 3 seconds to reset the time for the HEPA-Rx
filter.
CARE AND MAINTENANCE 1
To maintain optimum performance of this air purifier, the HEPA-Rx Filter, the Activated
c
arbon
f
ilter and the
UV-C+
lamp
need to be replaced when the indicator lights are flashing. If the device is operating in
an atmosphere with heavy dust, particulate or pet dander, you may need to periodically vacuum the
pre
filters for optimal performance.
1. Make sure all the filters are installed properly before operating the unit.
2. When
conducting
maintenance on the unit, be sure to unplug the power cord
.
3. N
ever handle the plug with wet
hands. If so, electrical shock and bodily injury may occur as a result.
Filters Life
1.
HEPA-Rx Filter needs to be replaced once a year (running 24/7).
2.
Activated Carbon Filter needs to be replaced once every 6 months (running 24/7
).
3.
UV-C+
lamp
needs to be replaced once a year (running 24/7).