10
5
Programming
The XQ515 is a very versatile sequencer and has 25 menu items that control its operation. Some
menu items allow predetermined options to be selected and others allow time delays or voltage
limits to be adjusted. All adjustments are made via the front panel and are achieved by turning
the two screwdriver-accessible rotary encoders labeled SEL (select) and ADJ (adjust). Turning
SEL steps through the menu (shown on the first line of the display), and turning ADJ allows each
menu item to be changed (shown on the second line of the display). The accessory kit contains a
screwdriver suitable for making adjustments and black plugs to cover the holes when
programming is complete.
To enter the programming mode first turn SEL one click clockwise. The display will then tell
you to press the red button. This puts you into the programming mode. All the options, delay
times and voltage adjustments are set using this mode. When you have completed the set-up turn
SEL counter-clockwise until the display tells you to press the red button again. Doing so saves
the new set-up information in non-volatile memory and puts you back into normal operation.
A password can be set while in the programming mode. Once a password has been set, you need
to enter the same password before you can get back into the programming mode again. This
prevents unauthorized personnel from changing the set-up information. The password option is
the last menu item and can be from one to six letters (A-Z).
You must be sure to remember the password once it is set as the only way to erase it is to erase
all the set-up information stored in the non-volatile memory. Please consult the factory to get
instructions if you ever need to do this.
The instructions and notes that follow are in the same order as the actual menu items.
5.1
Power XQ515uencing Control
The following eight menu items must be set before the XQ515 can be used in a system. These
determine the function and delay times of the XQ515uenced banks, and the type of control input:
DC voltage, contact closure or switch. Please see section 3.2.1 for details.
Bank C Function
Select normal XQ515uencing or Always On
Up & Down Inputs
Select the option as per section 3.2.1
Delay A On
Set the delay in seconds for Bank A powering on
Delay B On
Set the delay in seconds for Bank B powering on
Delay C On
Set the delay in seconds for Bank C powering on
Delay A Off
Set the delay in seconds for Bank A powering off
Delay B Off
Set the delay in seconds for Bank B powering off
Delay C Off
Set the delay in seconds for Bank C powering off