12
9.
An appropriate fire extin
-
guisher (electrical fires)
and first aid kit should be
kept readily accessible
while performing mainte-
nance on this equipment.
10. Inspect and tighten all bolts, nuts and screws
and check that all electrical and fuel connec-
tions are properly secured to ensure genera-
tor is in a safe condition.
11. When completing a maintenance or service
function, make sure all safety shields and de-
vices are installed before placing the genera-
tor in service.
12. When performing maintenance on this equip-
ment always have at least 2 workers present.
Do not work alone in case an emergency
should arise.
13. When cleaning any parts, do not use gasoline
but use regular cleanser.
14. Always use proper tools, that are in good con-
dition. Make sure you understand how to use
them, before performing any service work.
2.6 REFUELING SAFETY
1. Allow the engine to cool if the generator has
been in operation.
2. Refuel only outdoors in a well-ventilated area
with the engine off.
3. Never smoke near fuel, and keep
other flames and sparks away.
4.
Do not overfill the fuel tank.
5. Always store fuel in an approved
container. Make sure that any
spilled fuel has been wiped up
before starting the engine.
2.5 MAINTENANCE SAFETY
1. Good maintenance is your responsibility. Poor
maintenance is an invitation to trouble.
2. Follow good shop practices.
• Keep service area clean and dry.
• Be sure electrical outlets and tools are
properly grounded.
• Use adequate light for the job at hand.
3. Make sure there is plenty of ventilation. Nev-
er operate the machine or the towing vehicle
in a closed building. The exhaust fumes may
cause asphyxiation.
4. Put the machine in
safe condition
before
working on this machine:
• Flip main switch "off" or disconnect all loads
• Shut off the engine.
• Ensure all components have stopped moving.
5. Allow the engine to cool before performing
maintenance, engine components and oil
may be hot enough to cause injury.
6. Never work under equipment unless it is
blocked securely.
7. When performing any service or maintenance
work always use personal protection devices
such as
• safety glasses,
• hand protection - gloves
• hearing protectors
• safety shoes
8. Where replacement parts are necessary for
periodic maintenance and servicing, genuine
factory replacement parts must be used to
restore your equipment to original specifica
-
tions. The manufacturer will not be responsi-
ble for injuries or damages caused by use of
unapproved parts and/or accessories.
