DOC 0004-SP
1
Revision 06/18/14
OPERATOR’S MANUAL
FOR LOW PROFILE
12,000 RPM 5 in. (127 mm) and 6 in. (150 mm)
RANDOM ORBITAL SANDERS
Manufacturer/Supplier
DIXON ENTERPRISES, INC.
571 BIRCH STREET LAKE ELSINORE,
CA 92530
Tel: 951-245-4200
Fax: 951-245-4299
All SurfPrep
TM
Random Orbital Sanders are warranted for defects in materials or workmanship for one year from the
date of delivery to the user. Combined with the SurfPrep
TM
superior quality, durability, and performance of the SurfPrep
TM
LP. To receive any expressed or implied warranty, tool
must be repaired by an authorized SurfPrep
TM
Service Center. The “Service Instructions” section in this document
is provided for use after completion of the warranty period. To receive warranty, tools must be operated under the
conditions as described in the “Putting the Tools into Service” section of this document and be connected to an air
supply system as shown in Figure 1. Tools that have been exposed to extreme conditions will be covered under war-
ranty at the sole discretion of SurfPrep
TM
Warranty
Please Read and Comply with:
Proper Use of Tool
1) General Industry Safety & Health Regulations, Part 1910, OSHA 2206, available from: Superintendent of Docu-
2) Safety Code for Portable Air Tools, ANSI B186.1 available from: American National Standards Institute, Inc.; 1430
Broadway; New York, New York 10018
3) State and Local Regulations.
This sander is designed for sanding all types of materials i.e. metals, wood, stone, plastics, etc. using abrasive
manufacturer or the manufacturer’s authorized supplier.
Do not use back-up pads that have a working speed less than 12,000 RPM free speed. Never use back-up pads
Required Personal Safety Equipment
Safety Glasses
Breathing Masks
Safety Gloves
Ear Protection
Recommended Airline
Size - Minimum
10 mm
3/8 in
Recommended Maximum
Hose Length
8 meters
25 feet
Air Pressure
Maximum Working Pressure 6.2 bar 90 psig
Recommended Minimum
NA
NA
Declaration of conformity
DIXON ENTERPRISES, INC.
571 BIRCH STREET LAKE ELSINORE, CA 92530
declare on our sole responsibility that the products
Table for particular Model) to which this declaration
relates is in conformity with the following standard(s) or other normative document(s) EN ISO 15744:2008. Following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive 2006/42/EC
Place and date of issue
Name
Signature or equivalent marking of authorized person
Important
Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
03.20.2013
Meri Faria
Operator Instructions
Includes – Please Read and Comply, Proper Use of Tool,
Parts Page, Parts List, Work Stations, Putting the Tool Into
Service, Operating Instructions and Compressor Layout,
Back-Up Pads, Service Tools and Accessories, Overhaul
Service Kit, Spare Part Kits, Service Instructions.
Original Instructions
