SurfLunk Mobile 2, Руководство по эксплуатации

Страница: 14 / 64

To
recharge the battery, connect
the Battery-Charging cable
to the
micro-USB jack on SurfLink Mobile
(Figure 2). Attach the USB connector
of the Battery-Charging cable to the
power adaptor (Figure 3) and plug
into a wall outlet. To ensure proper
charging, verify that the lightning
bolt charging indicator appears on
the taskbar.
The SurfLink Mobile battery can also
be charged via a computer USB jack
or an optional car charger adaptor,
although it may take longer than recharging via a
wall outlet. Charging time may also take longer if the
SurfLink Mobile is streaming audio while it is being
recharged.
Plugging SurfLink Mobile into active power source will
briefly light up the display (when the SurfLink Mobile
is powered On, but the display is Off).
TIP
– If SurfLink Mobile is powered Off, then
plugging it into an active power source will begin
the recharge process even though the display does
not illuminate.
S
URF
L
INK
Fig. 2
Fig. 3
14 14
Getting Started