Surface Concept DLD6060-8S, Руководство пользователя

Страница: 10 / 37

10
Delayline Detector DLD6060-8S Manual | Surface Concept GmbH
• Install the detector into your vacuum chamber.
• Keep the vacuum container in case that the detector must be sent back for repair. It can also be used to
store the detector when not installed in a vacuum chamber.
Note
• The red dot in
Figure 3
marks the 0/0 positions of the two DLD images (0° and 45° system). The 0/0
position of the 0° corresponds to the upper left corner of the image in the software.
Figure 3: 0/0 position of the DLD image (red dot) for the a) 0° system and b) 45° system.
The detector should be kept under vacuum all the time.
3.2.2 Detector Orientation
3.2.3 Cabling and High Voltage
• The general connection scheme of the Delayline Detector including its readout package is shown in
Figure 4.
Image 0/0 position
Orientation pin in DLD cover
a)
Image 0/0 position
Orientation pin in DLD cover
b)