SURF & TURF CANOPRO LITE, Руководство по сборке

Страница: 6 / 20

As this frame has two inner legs, making
for a total of 3 sections, it is best to raise
one side and one leg section at a time
(as seen right).
Lift a corner leg and pull out the bottom
most leg section until you hear the pull
pin click into place. Repeat in a
clockwise or counter clockwise direction.
With the bottom leg section raised into
place we can now raise the middle
section. Repeat the same process as
above, raising one side at a time to your
desired height as seen right.
Now that the bottom and middle leg
sections are extended, the pull pin
location hole is now accessible. Place
your foot on the foot plate of the leg
and push the cross bars up into place as
seen right.
Make sure all your legs are
straight and secure the shelter with
your choice of weights. On soft ground,
use supplied anchor stakes for
added security.